Tenda W311M is a mini USB WiFi adapter. It use Ralink RT5370 chip.

TP-LINK TL-WN727N also has the exact chipset as Tenda W311M, and the instructions below also apply to TP-LINK TL-WN727N.

• I had configure usb Ralink RT5370 802.11b/g/n adapter in Ubuntu 12.04. Lsusb: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter I use rt2800usb driver - it seem to be better then the orig from Ralink - more features, no (???) logs. But this driver do no know this particular usb ID.
• CUDA Application Support: In order to run Mac OS X Applications that leverage the CUDA architecture of certain NVIDIA graphics cards, users will need to download and install the 7.0.52 driver for Mac located here.

Devices with RT5370 chipset do not work out of the box in Ubuntu 11.10 to 12.04. They work automatically in Ubuntu 12.10.

There are two drivers supporting this chip, a driver supplied by RALink and the rt2800usb which is part of the Linux kernel tree. Dh 16a1l drivers for mac.

Ralink driver

Try downloading and installing the latest linux-backports (not the one with the same version as your kernel, the latest).

Ralink Driver must be compiled. Ralink only supports Infrastructure and Ad-Hoc mode.

Avance logic als4000 audio device pci driver for mac. 1. Download the Linux driver from Ralink

RT3070/RT3072/RT3370/RT5370/RT5372 all-in-one driver package. The latest version is v2.5.0.3

http://www.ralinktech.com/en/04_support/support.php?sn=501

2. Extract the package to user home, and rename the directory name to sta, for example.

3. Change HAS_WPA_SUPPLICANT and AS_NATIVE_WPA_SUPPLICANT_SUPPORT from n to y in os/linux/config.mk

# Support Wpa_Supplicant

HAS_WPA_SUPPLICANT=y

# Support Native Wpa_Supplicant for Network Maganger

HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y

4. now just make, make install, and register your module with modprobe

5. To enable the module at each boot add your module to /etc/modules

Thanks to vitoshka@

rt2800usb driver

rt2800usb is more powerful. 'The rt2x00 driver is currently in the kernel tree marked as experimental.'

If the kernel is 3.0.0-12 above(?), it's very easy to enable the driver.

Canon Pixma Driver For Mac

Then there will be an interface named wlan0

Make the driver loaded at every boot (this step is not needed if you use the udev method below).

Removing rt5730 module if was installed

Remove the rt5370sta module if you added it like in the Ralink driver section above.

Open the modules list

and delete 'rt5370sta' from the list. Save and close.

Unload the rt5370sta module

Enable support in udev

'udev is a generic kernel device manager. It listens to events the kernel sends out if a new device is initialized or a device is removed from the system. The system provides a set of rules that match against exported values of the event and properties of the discovered device. A matching rule will possibly name and create a device node and run configured programs to set-up and configure the device.' ---chili555@

Suppose you're using GNOME

A new empty document will open. Copy and paste the text as follows:

save and close gedit Create another file

A new empty document will open. Copy and paste the text as follows:

save and close gedit

make the file executable

Download Brother Driver For Mac

so the two files looks like below

Configure Access Point Mode

The W311M can work as an access point with hostapd >=0.7.3. And there is more

Xbox One Controller Driver For Mac

CategoryWireless